2019黄大仙六肖必中

行业新闻
  • 焊枪提升损坏Enhance the gun damage
  • 本站编辑:杭州雄盛机械有限公司发布日期:2018-07-11 20:35 浏览次数:
Enhance the gun damage

此种情况发生在使用提升式螺柱焊枪时。This happens in the use of lifting type stud welding gun at.

检测方法:Detection method:

(1)开机时检查焊机面板上提升线圈指示灯是否亮起,不亮说明焊枪插头未插好10.或焊枪提升损坏;
(1) Lift the welder panel to check if the boot welder panel lift coil indicator is not bright, that gun plug or 10 gun upgrade damage;

(2)将提升调至大刻度(调整提升时务必先将提升调整环向上提起,然后再进行调节,如果直接强行旋转提升调整环,会导致提升调整环损坏),将焊接电压调至低值,试焊螺钉一次,当有明显提升感觉时说明提升未损坏,否则表示提升已损坏。
(2) In order increase to the maximum scale (adjustment promotion must first be enhanced by adjusting the ring upward and then adjust directly to force the rotary ring to be adjusted whilst been lifted. This will lead to enhance the adjustment ring and cause damage to the welding voltage resulting in minimum value as a result. When testing a welding screw, it may significantly enhance the feeling that it is not damaged, otherwise may be said that the lift has been damaged.
 
解决方案:如发现焊枪提升损坏,需联系维修,私自维修可能造成更大损坏。
Solution: if the torch lift is damaged, contact maintenance, because unauthorized repair may cause more damage.

2019曾道人大全 香港马报资枓大全 9号棋牌APP 2019曾道人大全 香港六合王中王资料论坛 管家婆2019综合资料 四不像特马生肖图2019 王中王论坛app下载 香港三中三免费论坛 PK10哪个平台赔率高